Brushed FRAG milled Zirconium scales for Spyderco MANIX 2 for Sale

Brushed FRAG milled Zirconium scales for Spyderco MANIX 2 For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Brushed FRAG milled Zirconium scales for Spyderco MANIX 2:
$219.50

Brushed FRAG milled Zirconium scales for Spyderco MANIX 2

Redesigned Scales for Spyderco Manix 2 with more comfortable handling and easier opening / closing.Now with Right hand carry, Tip up Clip position with optional Left hand carry These scales are designed for the standard Manix 2 with the Steel liners and will replace the factory G10 scales only (you will still need the Steel liners for the install). If you want to order these scales for your Manix 2 Lightweight, send me a message and I will refer you to a 3rd party hardware swap kit that converts your Lightweight Manix 2 so you can use my standard scales. The Lightweight Manix 2 models feature a \"unibody\" plastic handle with two pins on the pocket clip side and two screws on the opposite side to secure the handles together. In contrast, the G10 version predominantly uses metal components and is assembled with screws instead of pins, facilitating easy swapping of custom scales, unlike the Lightweight version.

INSTALLATION: You can use the hardware from the factory knife you purchase separately (*Installation of the scales requires some basic tools and knowledge. You will need a good torx bit set to remove the screws and pivots. The pivot can be tough to remove if you don\'t know what you are doing. You can search YouTube for more instructions or email me. There are small parts on the Para 2. Disassemble at your own risk as there are no refunds).NOTE: Disassembly of any knife is not covered under the original manufacturer\'s Warranty.

Black ZIRCONIUM: Pure Zirconium (Zr Atomic number 40) is a lustrous, grey-white, very strong, lightweight and hypoallergenic metal that closely resembles hafnium and, to a lesser extent, titanium. Zirconium is extremely resistant to heat and corrosion and it is lighter than steel.Through my own heating process, I create a unique appearance, that\'s called \"Black Zirconium\" or \"Oil Slick\". Through this high heat, a layer of extremely hard black oxide grows on the metal. This thin black layer is much harder than pure Zirconium, which does not rub off over time. Therefore, it is more durable than black-coated items, such as black tungsten and titanium. This \"black\" or \"Oil Slick\" color is permanent, it does not fade, tarnish, or change color.

Zr WEIGHT: You can also request the scales to be installed on Factory Knife as a custom order. Just send me a message.

PRECISION: Each MetonBoss item is precision CNC machined from a solid billet in my Anaheim manufacturing facility in California, USA.

EVERY DAY CARRY - LIFETIME WARRANTY

DISASSEMBLY of any knife is not covered under the original manufacturer\'s Warranty.

PROCESSING TIME: Our turn around time is about 3-6 business days, unless installation is requested that may take a few days longer. (A very few may take longer as I am a CNC machine shop and my products are not off the shelf mass produced items. Even though most of them are in stock, some are only in machined form, so they still need to be finished to your order specifics - such as color treatment, patterns, etc. - as there are thousands of variations you can select in my shop. If you need any item urgently, please ask me before ordering to be sure.) Thank you and happy shopping, Sean.

We appreciate your support and love for MetonBoss EDC products, including Knife Scales and Hardware, Lanyard beads, Prybars, Flashlights, Pill boxes, Haptic Coins and Fidgets, Worry Coins and Spinning Tops!